486
88 FEDERAL REPORTER..
demand for this patent was created by the extensive use of hollow tiling having one or more longitudinal openings laid jn lengthwise parallel courses, with the end of the sections of each course arranged to register. The great demand for such a conduit induced the complainant to give his attention to some instrument which would remove from the inside of these hollow tile conduits the cement with which the end of each section was bound together, so as to make a continuous conduit, without obstructions in the interior to impede the laying of wire therein. The mandrel which the complainant made for that purpose is a very simple device. It has a rubber rim about one end of it, which serves to break oft' and push or sweep ahead' of it all the particles of cement that stick to the interior of the conduit in laying it. The other end of the mandrel had a handle by which it could be moved backward and forward. With this simple device, the tile was laid lengthwise, and joints fitted, and the interior made smooth and passable; and the problem of an easy nse of the interior of such hollow tiling was solved. Now, while it is true that there was no great invention developed in this simple device, it is just one of these happy successes which occasionally reward the inventor in his diligent the public. search for something new and useful, and acceptable The fact that the use of this mandrel has so rapidly increased the sale of tiling is a significant fact, and tends to support the claim of invention. In all the large cities it was a problem of great importance how to put underground all the wires used for the many purposes for which electricity is now employed. But a mere multiplication of words would not make more plain what must seem a fair conclusion. to every impartial mind,-that the patentee in this case did invent something new, and that his patent must be declared valid. The patent office allowed it without any hesitation, as the file wrapper and contents show. The defendants concede that, if the patent is new, they infringe. They claim that the use of the mandrel accompanied the purchase of the tile. If they can show any such contract as this, it will have a material effect upon the am'<lunt of damages to be awarded, but does not go to the complainant's right to have the patent sustained. A decree may be prepared, referring the case to Mr. Belford, as master, to ascertain and report the damages to which the complainant is entitled. HAGGENMACHER v ·. NELSON et at. (Circuit Court, E. D. Pennsylvania. June 22, 1898.) No. 6. A reissue In which all the claims ot the original are Uterally reproduced, excepting one, which Is predicated on the same Invention as the original, but which expresses more clearly what would, under the ordinary doctrine ot eqUivalents, be the legal effect of the original, Is valid. l. BAHB-F'LotrR,SIll'Tmo.·ApPARATUS. The Haggenmacherpatents, reissue No. 11,252 No. 428,0(7) and No. 428,9(8, 'or "apparatus for sifting and sorting flour," construed, and
L
PATENTS-VALIDITY 01' REISSUB.
HAGGENMACHER·V. NEJ,SON.
487
held valid and Infringed,-the former as to claIms 1, 2, 4, 5. 6, and 11, and the latter as to claIms 1 and 2.
This was a suit in equity by Carl Haggenmacher against William T. Nelson and J. H. Sm.all, co-partners as the McAnulty Mill Works, and J aim A. McAnulty, for alleged infringement of reissue patent No. 11,252, dated June 28, 1892 (original No. 428,907, dated May 27, 1890), and also letters patent No. 428,908, both issued to com.plainant, Carl Haggenlllacher. In the specifications of the reissue the machine is described in part as follows: "This Invention relates to machines for sifting and sorting meal and flour, and It consists In the novel construction and combination of the parts, as hereinafter fully descrIbed and claimed. In the drawings, Fig. 1 Is a front view of the complete machine. Fig. 2 Is a side vIew of the same. Fig. 3 Is a longitUdinal section through the frame box R, and Figs. 4 awl 5 are, respectively, a cross section and a plan view of same, partly In section. Figs. 6 to 13, InclusIve, are detail plans and cross sections. - · ·
....,
,Ai
4,'
r2JDDDDc=1
488
88
lI'1llDlIlRAL RlIlPORTlIlL
Fiy.J!
BAGGENJrlACHER V. NELSON ·
489
·
.................. :1
· 11
'. " ,
Fr1.S.
Z1.--t.--
-4._ _.J 1-4
"The frames, I, II, III, IV, V, rest superposed upon the bottom, b, of the box, R, and are inclosed by the sid!'!", T, T'. and lid, d, secured together by any approved means. Each frame Is provided with longitudinal guide slats, It, In llne with the main direction of travel of the material, and with cross slats, y, at right angles to slats, x. For the purpose of turning over the material, every alternate slat, y, has a low ridge, u, extending from the end of It to the opposite slat, x, or to the box side. These ridges are of a height about equal to the depth of the material operated on, and are not shown In Figs. 5 to 9, to avoid confusion. Between every two ridges, u, the tops of the Intervening slats, Y, are extended to the opposite slat, x, or to the box side, forming bridges, v, and leaving a passage for the material under said bridges. These bridges strengthen the frames to which they are attached, and support the frames above them. The sifting surfaces, 0, stretched under the frames, consist of perforated metal, 01' woven wire 01' silk fabric. while the collecting surfaces. L, consist of linen, or other similar close-woven or imperforate material. These surfaces are all fastened to the lower edges of
490
,.88
FlllD1i;RAL RlllPORTlllR.
their respective frames. The tra.vellng action of the slats, y, upon the material, Is Illustrated In. Fig. 5. P are particles of material which are caused to move i.D, the paths Of, the dotted semicircles by the circular oscillations ot the surface the direction of their travel being. determined by the side upon W!i1ch the slats, Y, are placed. These particles would move in circular paths;. but, as soon as they have performed the first halves of their circular journeys, they meet the slats, Y, 'whlch arrest their motion during the time they would lle passing over the second halves the circles, and only permit them to resume their journeys in the forward dlrectlonl.as Indicated by the arrows. ,ay placing the slats, y, In appropriate positions;' the particles can be causedtq' travel in any desired direction. The irregular shape and size of the particles, their friction agalnst each other and against the sides and slats, and many other circumstances, all tend to modify the theoretical semicircular paths in which they should travel: but what is true ot a single particle is also true with regard to the aggregate action ot an immense number of particles :When the surfaces over which they are caused to travel are sufficiently numerous, and the slats are arranged In a sufficiently complex manner, to meet all requirements. The ridges, u, turn over the material and the bridges, v, even it upon the surface of the sifters or collectors. Every particle Is In turn brought In contact with some portion ot the sifting surtace, and the collecting surfaces, L, are for the purpose of conducting the material to certain desired parts of the remaining sifting surfaces beneath them. The longitudinal slats, x, keep the streams of material traveling In definite paths, and the arrangements of slats, x and y, may be varied to an almost unlimited extent to adapt the machine to different sorts of material. The sifting surfaces may also be combined with the collecting or conveying surfaces In many llifferent ways." The drawings in the other patent in issue (No. 428,908) are as fol,
J J1 ;JflT
:Jr,
.'
HAGGENMACHEB V. NELSON.
491
Robert H. Parkinson, for complainant. Homer Morris, for defendants. DALLAS, Circuit Judge. The defendants are charged with In· fringement of two patents for "apparatus for sifting and sortin/: flour." The first of them was granted to the complainant May 27. 1890, as No. 428,907, and reissued June 28, 1892, as No. 11,252. The second (No. 428,908) was a division of the first. The claims of reissup No. 11,252, which are sued on, are as follows: "(I) In a chop grader, a frame having a gyrating motion. and provided with guides in Hne with the desired main direction of travel of the material, and cross slats, y, extending part way across its surface between said guides, for causing the material to travel over the said surface, substantially as set forth. (2) In a chop grader, a frame having a gyrating motion, and provided with a sifting surface of perforate material, the guide slats, x, upon its sifting surface, in line with the desired main direction of travel of the mate· rial. and cross slats, y, extending part way between said slats, x, for causing
492
88 FEDERAL REPOlt1:'lllR,
the material to travel, substantially as set forth." "(4) In a chop grader, the combination, with a frame box, provided with an inlet at its upper and outlets at its IQwer part, of rods pivotally supporting said box, a revoluble device, such 8.8 a crank, for imparting a continuous'gyratlng movement to said box, and a frame supported in said box, and provided with a perforate sitting surface, and with guide slats, x, and with cross slats, Y, arranged on said surface, substantially as and for the purpose set forth. (5) In a chop grader, the combination, with a gyrating frame box, of a series of superposed- frames in said box, said frames being provided with guide slats, x, and cross slats, y, for directing the material over their surfaces, and with openings through which the material may pass from the upper to the lower frames of the series, substantially as and for the purpose set forth. (6) In a chop grader, the combination, with a gyrating frame box, of a series of superposed frames in said box, some of said frames being provided with perforate sifting surfaces of various fineness for sifting and grading the material. and alternating with other frames having Imperforate conveying surfaces, all of the said frames being provided with guide slats, x, and cross slats, y, for causing the material to travel over their surfaces, substantially as and for the purpose set forth." "(11) A sieve having a gyrating motion, and provided with line guides in the desired main direction of travel for determining the path or paths of the stock's travel, and with propelling surfaces between the said gUides for pffectlng the travel of the stock under the gyrating motion of the sieve."
The claims of patent No. 428,908, which are sued on, are as follows: "(1) In a chop grader, a frame having a substantially horizontal gyrating motion, and provided with curved guides In line with the desired main direction of travel of the material, and cross slats, y, extending part way across its surface between said guides, for causing the material to travel over the said surface In substantially circular paths, as hereinbefot'e set forth. (2) In a chop grader, the combination, with a horizontally gyrating clrcnlar frame box, of a series of circular superposed frames in said box, the bottom surfaces of said frames being provided with curved guide slats, x, in line with the desired main direction of travel of the material, and with cross slats, y, extending part way between said guide slats, for causing said material to travel, substantially as set forth."
But for the question to be presently considered, touching the validity and construction of these patents, no doubt could reasonably be entertained that the infringement charged has been clearly proved. The -evidence admits of no other conclusion, and the argument presented on tJehalf of the defendants rests mainly, if not solely, upon the theory ,that noninfringement results from the interpretation of the claims tor which they contend. I will dispose of the case with reference to :the points made by their brief: 1. Defendants contend, with respect to the first claim of each patent, .that the "cross slats, y," designated in both of these claims, should be taken to include, .and were "intended to incluae, the additional parts. u and v, for turning over the material and evening it," in which case the defendants' device would not infringe. But the construction thus proposed is, I think, a forced and unreasonable one. It involves the importation into the claim of language which was not used, and which must be assumed to have been designedly omitted, for in claim No. 3 (not here involved) the parts now sought to be injected into these elaims, namely, the ridge, u, or bridge, v, "for turning over and evening the material," are expressly included. The learned counsel of the defendants has argued that because some of the figures exhibit u and v in connection with, and seemingly as extensions of, the part. y, the latter should be understood as being inclusive of the former; but
UNITED STATES GLASS CO. V. ATLAS GLASS CO.
493
the patent as a whole forbids aceeptance of this understanding. The cross slats, y, and the other parts referred to, are distinctively mentioned, and their respective objects are plainly differentiated. The 11,252 has been enforced by the defense as to claim 2 of patent same comse of reasoning as that applied to the first claim of each patent; and it is insisted that it maintains the proposition that "cross slat, y, means y with u," and that, therefore, the defendants "do not infringe claims 1 and 2 of No. 11,252, or claim 1 of No. 428,908." I am, as I have said, unable to acquiesce in the reasoning referred to, and consequently cannot adopt the deduction supposed to be derived from it. 2. The defendants have adduced several patents in support of the defense of lack of novelty, and their learned counsel has in argument especially referred to the Robertson, the Jesse, the Hahn, and the Gilbert patents, but by none of these is there disclosed the invention of the presumptively valid patents in suit. Haggenmacher unquestionably produced a device by which a marked advance in the art was !tttained, and the testimony of the experts and practical millers is in substantial accord as to its novelty. As was said by an expert witness for the defendants, neither of the exhibits prior to the Haggenmacher patents embraces every feature of construction along with the special motion of the latter. 3. The attack made upon the validity of the reissue cannot prevail. It is, in my opinion, fully met and overcome by the argument submitted in the brief for complainant, from which I quote: "While one of the two patents sued upon is a reissue, it Is open to none of the attacks generally made upon reissued patents. Defendants' machine is equally within the claims of the original. All the claims of the patent, except the eleventh, are literally reproduced from the original. The eleventh is predicated on the same invention as the original patent; stating that invention in terms intended to express more clearly that which WOUld, under the ordinary doctrine of equivalents, be the legal .effect of the original."
That such a reissue is within the scope of the statute is, I think, clearly demonstrated by the authorities cited on behalf of the complainant, with which those cited for the defendants do not, upon examination, appear to conflict. Reed v. Chase, 25 Fed. 94; Odell v. Stout, 22 Fed. 159; Powder Co. v. Powder Works, 98 U. S. 126; Eames v. Andrews, 122 U. S. 40, 7 Sup. Ot. 1073; Topliff v. Topliff, 145 U. S. 156, 12 Sup. Ct. 825; Walker v. City of Terre Haute, 44 Fed. 70; Marsh v. Seymour, 97 U. S. 348. Decree for complainant. UNITED STATES GLASS CO. v. ATLAS GLASS CO. et at (Circuit Court, W. D. Pennsylvania. April 13, 1898.) 1. PATENTS-CHARACTER OF INVENTION-PRIOR ART.
The question of the commercial success or failure of a prior patent 18 not controlling on the question of its relevancy, as U1ustrating the generic type of 1!he patented maehlne in issue and the generaJ process and path of development which the inventor claimed to follow.
2.
SAME-EFFECT OF DISCLAIMER-CONSTRUCTION OF CLAIMS.
When an application is rejected as anticipated, and the applicant then files a narrower claim accompanied by a disclaimer, he Is thereby,